
Ring Abstract
Follow Steps #1 -4 Before Starting Design Choice
Gather Your Choice Of Premixed Paint Colors, Ring, String, 24 Inch Chain, Scissors, Rod, Metal Shovel Blotter And Fine Line Paint Brush
Cut eight strings 24-inches in length
Use the 24-inch chain provided in the kit as a guide for measuring and cutting the string
Using 4 of the strings, place one string at a time on top of the prepared canvas following the S pattern
Starting with your first color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the first set of paint color drops
Starting 1-inch from the top of all 4 strings place a drop of your first paint color
Place 1-inch from the bottom of all 4 strings place a drop of your first paint color
Next in the curves of the S of all 4 strings place a drop of your first paint color
Using your second color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the second set of paint color drops
Placing the second set of paint color drops next to all of the first set of paint color drops, building a color pattern, and placing them side by side
Using your third color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the third set of paint color drops
Placing the third set of paint color drops next to the second set of paint color drops building a color pattern, and placing them side by side
Using the fourth color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the fourth set of paint color drops
Placing the fourth set of paint color drops next to the third set of paint color drops building a color pattern, and placing them side by side
Pulling The Strings Through The Ring To Pull The Paint
Gently and slowly one at a time pick up the ends of all 4 strings in the middle of the canvas
Gently and slowly place all 4 ends of the string through the ring without disturbing the design
Keeping ahold of the strings Gently and slowly pull all 4 strings up through the ring at the same time holding the ring in the center, very still and just above the canvas as you pull the paint
Place the strings into the bucket of water until ready for cleanup
Place the ring to the side for the next pull
Use the metal shovel blotter to remove excess paint by tapping lightly where the paint has gathered in the center and wipe off on a paper towel as needed set aside for next step
Repeating The Same Process With The Last 4 Strings
To complete the abstract repeat the same process with the last 4 strings
Place the 4 strings following the S shape pattern as shown below
Be careful not to disturb the first pulled design
Repeat The Same Process Until All 4 Paint Color Drops Are Done
Starting with your first color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the first set of paint color drops
Starting 1-inch from the top of all 4 strings place a drop of your first paint color
Next 1-inch from the bottom of all 4 strings place a drop of your first paint color
Next in the curve of the S of all 4 strings place a drop of your first paint color
Using your second color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the second set of paint color drops
Placing the second set of paint color drops next to all of the first set of paint color drops, building a color pattern, and placing them side by side
Using your third color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the third set of paint color drops
Placing the third set of paint color drops next to the second set of paint color drops building a color pattern, and placing them side by side as shown below
Using the fourth color choice gently and slowly squeeze the applicator bottle using the applicator tip for direct placement of the fourth set of paint color drops
Placing the fourth set of paint color drops next to the third set of paint color drops building a color pattern, and placing them side by side as shown below
Pulling The Strings Through The Ring to Pull The Paint
Repeat the same process with all 4 strings
Gently and slowly one at a time pick up the ends of all 4 strings in the middle of the canvas
Gently and slowly place all 4 ends through the ring without disturbing the design
Keeping ahold of the strings Gently and Slowly pull all 4 strings up through the ring at the same time holding the ring in the center, very still and just above the canvas as you pull the paint
Place the strings, into the bucket of water until ready for cleanup
Use the metal shovel blotter to remove excess paint by tapping lightly where the paint has gathered in the center and wipe off on a paper towel as needed
Place the ring and metal shovel blotter, into the bucket of water until ready for cleanup
Finalize The Design
Using the very tip of the rod, pull through the tips of each design to give it a whimsical finish
Place the tip of the rod into the bucket of water until ready for cleanup
SEE CLEANUP INSTRUCTIONS
FOR BEST RESULTS LET YOUR PAINTING SIT FOR 48 HOURS OR UNTIL COMPLETELY DRY







